VisualCron is by default running as the SYSTEM account. One problem you may face is that you can't see/access your network drives. This is a restriction in Windows - that network drives are not shared between accounts.
To handle this, a way to control network drives from the system account is implemented. This enables map/disconnect network drives directly from VisualCron.
In the main menu, click on Server -> Network drives to access the interface for mapping/disconnecting.
Map drive
When mapping a drive you need to specify a Credential, a user that has access to the network drives, that is either a domain user or a user on the remote server. Specify a wanted drive name and path.
Path should be entered in UNC format like this: "\\servernameORip\folder\"
Click on Map drive to map it. It is now controlled by VisualCron and each time VisualCron is started it tries to re-map the drives so these can be accessed after a server reboot.
Reconnect
If a drive has been disconnected during a VisualCron session you can reconnect it here.