Please note that VisualCron support is not actively monitoring this community forum. Please use our contact page for contacting the VisualCron support directly.


ChristiaanS
2021-07-06T08:50:53Z
I am busy setting up a master-multiple slave system.

But how can I have some jobs (combined in a group) only for the master, while I want every other group/ job to be synched to all the slaves.

If I setup an all jobs synch then I also receive the master-only jobs.
And if I select single-jobs then I will surely miss out on newer jobs as any new job should be activated on all the clients (which defeats the purpose imho)

Currently I have tried to fix it with setting a condition on the master-only jobs which says {COMPUTER(Name)} = MASTER01 but I have seen the job started multiple times (and I believe from slave-servers).

Also what is the difference between :
<a href="//imgur.com/a/mcgLIhL">Image 1</a>
And :
<a href="//imgur.com/a/k0eYWoV">Image 2</a>
As on some slaves it shows as nr 1 and on some slaves it shows as nr 2 (and if i edit it there and click on ok, then it changes to nr 1)
Sponsor
Forum information
Support
2021-07-08T14:49:03Z
Originally Posted by: ChristiaanS 

I am busy setting up a master-multiple slave system.

But how can I have some jobs (combined in a group) only for the master, while I want every other group/ job to be synched to all the slaves.

If I setup an all jobs synch then I also receive the master-only jobs.
And if I select single-jobs then I will surely miss out on newer jobs as any new job should be activated on all the clients (which defeats the purpose imho)

Currently I have tried to fix it with setting a condition on the master-only jobs which says {COMPUTER(Name)} = MASTER01 but I have seen the job started multiple times (and I believe from slave-servers).

Also what is the difference between :
<a href="//imgur.com/a/mcgLIhL">Image 1</a>
And :
<a href="//imgur.com/a/k0eYWoV">Image 2</a>
As on some slaves it shows as nr 1 and on some slaves it shows as nr 2 (and if i edit it there and click on ok, then it changes to nr 1)



Hi Christiaan,
Can you send us screenshots of your configurations/conditions to support@visualcron.com please?
Michael
Support
http://www.visualcron.com 

Please like  VisualCron on facebook!
Scroll to Top