Exit code 77777 - VisualCron - Forum

Community forum

ShaunCro
2014-09-10T06:27:59Z
Good Day,

I'm assisting a client who run's this software with an issue. We run an FTP over SSL explicit server that requires login. They have setup the connection to our server, but when ever the job runs, it fails.

Through the explorer I can browse the server and even copy the test file from the server to my local pc, but the second I try do this as an automated job it fails. I get the following error.

Version is V7.1.6 - Requires change control to upgrade, so not an option at this point.

Exception in Task: Failed to CommandFTPCopyMoveFiles file(s), err: Unaccepted server reply (error code is 550)

220 Microsoft FTP Service

AUTH TLS
234 AUTH command ok. Expecting TLS Negotiation.

USER AfricanBank
331 Password required for **********.

PASS ********
230 User logged in.

PBSZ 0
200 PBSZ command successful.

PROT P
200 PROT command successful.

FEAT
211-Extended features supported:
LANG EN*
UTF8
AUTH TLS;TLS-C;SSL;TLS-P;
PBSZ
PROT C;P;
CCC
HOST
SIZE
MDTM
REST STREAM
211 END

PBSZ 0
200 PBSZ command successful.

PROT P
200 PROT command successful.

SYST
215 Windows_NT

PWD
257 "/" is current directory.

PWD
257 "/" is current directory.

PWD
257 "/" is current directory.

PWD
257 "/" is current directory.

PWD
257 "/" is current directory.

PWD
257 "/" is current directory.

TYPE A
200 Type set to A.

PASV
227 Entering Passive Mode ).

LIST
150 Opening ASCII mode data connection.

226 Transfer complete.

PWD
257 "/" is current directory.

PWD
257 "/" is current directory.

SIZE c:\/Test.txt
550 The parameter is incorrect.

RNFR /Test.txt
350 Requested file action pending further information.

RNTO c:\/Test.txt
550 The parameter is incorrect.

Now I'm not sure if the error is the same on his side, but I can say this is what I have been able to replicate with the a pretty general setup.
Support
2014-09-10T08:49:26Z
So, it seems to be a problem with a path. This does not look like a valid Windows path:

c:\/Test.txt
Henrik
Support
http://www.visualcron.com 
Please like  VisualCron on facebook!
ShaunCro
2014-09-10T08:57:21Z
Originally Posted by: Support 

So, it seems to be a problem with a path. This does not look like a valid Windows path:

c:\/Test.txt



Yes, I also noticed this, but when setting up the source and destination (BTW the fact that you have a browse button and no select folder button is very irritating) the source is / and the destination is C:\ the software adds that, not me.
Support
2014-09-10T09:18:42Z
I am not sure what you mean by the browse buttons? Maybe you are mixing up download with upload?

Please let us know the command you are trying to accomplish, screenshots and which button is irritating.
Henrik
Support
http://www.visualcron.com 
Please like  VisualCron on facebook!
ShaunCro
2014-09-10T09:33:26Z
Browse button - Irritation.

Browse Button

So now you have found your folder that you want to select, where is the select button????

Where do you now select the folder?

Then this is how I have configured my source and destination

I'm trying to move the test file, to my local c:\ as a test.

Config Remote

Destination.
Support
2014-09-10T09:55:18Z
I see what you mean. I would not see that irritating. It is just a link to the built in explorer - a nice feature I would say. But you can click "Copy to clipboard" to get the folder.

We could not reproduce the error in the latest version. Could you please test the latest version whenever possible (you could try it on your desktop to see if it works better at least if you are not able to upgrade server yet).
Henrik
Support
http://www.visualcron.com 
Please like  VisualCron on facebook!
ShaunCro
2014-09-10T10:00:31Z
It is irritating Henrik, because 99% of all other windows based software works this way. So when you spend ten minutes trying to find something, deleting everything because you think you did something wrong hence it not bringing up the option and starting over... it is very irritating.

Upgrading is not an option, with a 3 month change cycle at the client on something that needs to be fixed now, an upgrade isn't an option.
Support
2014-09-10T10:02:24Z
Originally Posted by: ShaunCro 

It is irritating Henrik, because 99% of all other windows based software works this way. So when you spend ten minutes trying to find something, deleting everything because you think you did something wrong hence it not bringing up the option and starting over... it is very irritating.

Upgrading is not an option, with a 3 month change cycle at the client on something that needs to be fixed now, an upgrade isn't an option.



I do think _very_ few other Windows software opens a browser that is compatible of viewing remote FTP and SFTP content. But you may have other experience on that.

It is just not _any_ folder browser.
Henrik
Support
http://www.visualcron.com 
Please like  VisualCron on facebook!
Support
2014-09-10T10:10:57Z
But either way I recommend testing it on your desktop to see if there is a generic problem or something with settings.
Henrik
Support
http://www.visualcron.com 
Please like  VisualCron on facebook!
al355
2014-09-10T13:32:37Z
Originally Posted by: ShaunCro 

It is irritating Henrik, because 99% of all other windows based software works this way. So when you spend ten minutes trying to find something, deleting everything because you think you did something wrong hence it not bringing up the option and starting over... it is very irritating.

Upgrading is not an option, with a 3 month change cycle at the client on something that needs to be fixed now, an upgrade isn't an option.



I think there is some misunderstanding here of how this browser works. It is not only for browsing a directory and hence a select button doesn't make sense in all contexts.
Once you are used to the 'Copy to Clipboard' button then it works well.

Not that Visual Cron doesn't have a few GUI idiosyncrasies 😂
Scroll to Top